Mortuary storage system is designed for storing cadaverous under cool condition to prevent decomposition. These are latest development in Mortuary technology offering vast space saving advantage over the conventional type together with greater hygiene. Useful for Hospitals, Railways & Airports etc.

Double-walled with mild steel/pre fabricated panels for outer surface and stainless steel inner chamber with insulation in between. Front opening, hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead bodies. Trays to carry dead bodies with handles at both ends, travel on rollers fitted for easy movement. Exterior surface in chemically treated, antirust coated and duly finished with powder coated paint. To avoid any moving part inside the cabinet, for easier maintenance and cleaning refrigeration unit is kept outside the chamber and fixed at rear. Temperature of –2⁰C to +5⁰C is maintained by hermetically sealed refrigerator compressor unit and is controlled by an automatic electronic solid state digital temperature controller cum indicator.

Temperature controller is mounted on front panel, provided on front top, along with pilot lamp, main switch etc. Supplied complete with trays, cord and plug. Suitable to work on 220 V, single phase, 50 Hz, Ac supply.

Available in following sizes

Single body
Two bodies
Three bodies
Four bodies
Six bodies

Prod. Code: TIFE.3700

Cadaverous Injector

For injecting Formaldehyde solution in Cadaverous at much higher speed than normal gravity process. Unit is fully covered & mounted on a portable trolley having four castor wheels for easy movement. Unit consists of one air compressor fitted with 1/2 hp Motor which is connected with a Stainless Steel Tank of 10 liters capacity meant for storing and injecting the solution. Tank is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection.

Supplied complete with electric cord, plug and suitable to work on 220 volts, 1ph 50 Hz, Ac supply.

Prod. Code: TIFE.3720

Bone & Meat Cutting Machine "Saw" with S.S. Table

Useful for preparing specimen of big size in Anatomy and Meat Departments. Fitted with large moving table and extension table operated on four ball-bearing rollers. Used extensively in the meat packing, and wholesale fish industry, for handling swordfish and large halbutes etc.

Specifications:

Size of Cutting Table 785 × 585 mm approx.
Total Table Travel 1245 mm approx.
Extension Table 455 × 760 mm approx.
Size of Wheel 455 mm approx.
Height 1700 mm approx.

The table is made of thick S.S. sheet with special heavy axles for easy and firm movement. Supplied complete with one blade, starter, cord and plug.

Suitable to work on 220 V, single phase, 50 Hz, AC supply.

Prod. Code: TIFE.3740

Autopsy Table

Autopsy table are specially for all kinds of postmortem work. The construction of these table incorporates state-of-the-art engineering, heavy gauge stainless steel and conveniences. Autopsy stainless steel table mounted on stainless steel tubular stand. Scientifically designed for maximum efficiency. Provided with Two Nos 6" wide body-supports (S. Steel) removable type, six position head rest, crusher (grinder/aspirator) for disposal, chrome plated swing spout mixing faccuet for hot and cold water, lever handle for waste/drain and deep & large S. S. Sink with overflow.

Prod. Code: TIFE.3760